Belt Tensioner Prob
#1
TECH Regular
Thread Starter
Join Date: Apr 2004
Location: La
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Belt Tensioner Prob
For some reason my belt seems to keep slipping off of the tensioner. The belt will come half way off and then excrete a loud whistle. Its actually popped completely off a couple times and I've had to perform open heart surgery on the side of the road. What is casuing this?
For reference: 6.0...Radix...3"....and the belt that came with the 3.4" pulley for the ol 5.3
For reference: 6.0...Radix...3"....and the belt that came with the 3.4" pulley for the ol 5.3
#2
Destroyer of Transmissions
iTrader: (28)
What length belt are you using? I think with a 3.4" you should be running a 112" belt. You now have a 3.0" so you prob need to shorten that up. I have a 111.5" belt on my 3.2" pulley. Engine doesn't matter, they all have the same pulley geometry. Just be happy your not snapping tensioners. I have broken 2 in the last 2 weeks. read these...
https://www.performancetrucks.net/fo...d.php?t=355323
https://www.performancetrucks.net/fo...lley+belt+size
I bet you need a 111.0" or 110.5" to keep it from walking off. Just dont go too tight or your alternator bearing will give out...pain in the *** huh?
https://www.performancetrucks.net/fo...d.php?t=355323
https://www.performancetrucks.net/fo...lley+belt+size
I bet you need a 111.0" or 110.5" to keep it from walking off. Just dont go too tight or your alternator bearing will give out...pain in the *** huh?
Last edited by 1SlowHoe; 01-08-2006 at 08:06 PM.
#3
what a rush!
iTrader: (8)
Originally Posted by WaitinToDrag
For some reason my belt seems to keep slipping off of the tensioner. The belt will come half way off and then excrete a loud whistle. Its actually popped completely off a couple times and I've had to perform open heart surgery on the side of the road. What is casuing this?
For reference: 6.0...Radix...3"....and the belt that came with the 3.4" pulley for the ol 5.3
For reference: 6.0...Radix...3"....and the belt that came with the 3.4" pulley for the ol 5.3
#7
Destroyer of Transmissions
iTrader: (28)
Mine does it on a WOT run. I nail it and when I let off I lose power steering. It happened once as soon as I stomped it the other time I went from 45mph to about 85mph and when I let off, no power steering. The tensioner broke both times. Could a belt that is too tight cause this? I have the tensioner almost maxed out so when the belt comes off the tensioner travels all the way back to the stop and SNAP!
Trending Topics
#8
TECH Regular
Thread Starter
Join Date: Apr 2004
Location: La
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moregrip
is it half off anywhere else? look at your belt alignment from the side, and what circumstance does this happen?