Cam suggestions for Magnacharger
10-21-2010, 10:32 AM
#11
Maggies are pretty forgiving with cam choice. You'll be hard pressed to find someone with a Maggie that doesn't like his cam choice. I think the two in my sig are the greatest ever
. Having said that, I'll agree with a few of the other guys.....send Pat G 25 bucks and have him get it very right the first time.
. Having said that, I'll agree with a few of the other guys.....send Pat G 25 bucks and have him get it very right the first time.
10-21-2010, 11:40 AM
#12
Why get an off the shelf cam when you can get one designed to suit YOUR needs? Granted, I don't have experience with custom cams, or FI for that matter, and I'll be guilty of running the 212/218 with the R-TVS, but it's supposed to work fine with the blower and it's already in the truck, a custom one is next.
There's no other way than custom cam in my book, specially when going FI: With all the $$$ I'm dumping on this thing I don't wan't to leave anything on the table, and this is for my DD. If I could only get a nice lope out fo a blower cam that'd be the icing on the cake. Of course not going to happen.
Damn, I should install the blower instead of loosing my time here
There's no other way than custom cam in my book, specially when going FI: With all the $$$ I'm dumping on this thing I don't wan't to leave anything on the table, and this is for my DD. If I could only get a nice lope out fo a blower cam that'd be the icing on the cake. Of course not going to happen.
Damn, I should install the blower instead of loosing my time here
Last edited by jiar577; 10-21-2010 at 11:49 AM.
10-21-2010, 12:22 PM
#15
TECH Regular
Pat G or go home
Just installed my Pat G spec'd blower cam. Picked up 74.6 peak HP and 56.4 peak TQ. Even better I picked up (from 3000 rpm on up) an average of 36.8 HP and 39.7 Ftlbs of torque. Keep in mind that this is a small cam on a 6.0that's nearly stealth.
Can't wait to see what it will do with the maggie!
Can't wait to see what it will do with the maggie!
The trucker cam has been proven to work well with maggies.
10-21-2010, 01:28 PM
#17
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: San Marcos/Austin, TX
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
ha damn aklow your truck rolls out!!! and sounds pretty damn good with that lope as well.. what lsa is that on 115? im still undecided i guess just trying to figure out all the choices i can get.. any of you guys have info on how i could get ahold of pat?
10-21-2010, 02:32 PM
#18
TECH Resident
iTrader: (8)
Join Date: Feb 2009
Location: Tahlequah/Norman, OK
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
