Can a 5.3 RCSB "pull" a Zo6 on the highway if...
#1
Teching In
Thread Starter
Join Date: Jul 2006
Location: crowley tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Can a 5.3 RCSB "pull" a Zo6 on the highway if...
Its bone stock with the addition of a garret gt 37 turbo about 430 rwhp.
Just curious. RCSB soon to be turbo.
Just curious. RCSB soon to be turbo.
#3
Teching In
Thread Starter
Join Date: Jul 2006
Location: crowley tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
what kind of pwr levels would i need at to do this. In my old mustang at 396 rwhp it was no prob. Being that the truck weighs more i understand that i will need more hp, but how much more?
#6
11 sec. Truck Mod
iTrader: (12)
i think there's a blue 4x4 on here that can But seriously youll need more power than 430rwhp to pull a Z06 unless the driver is asleep. LOL , I have raced an LT1 vette and a TPI vette and beat fairly easy but my uncles C5 i can beat him off the line (4X4) but top end we are close to about 90-100 and he starts to get away. So i think for you to "pull" a 505 horse Z06 your gonna need 600+ Rwhp IMO.
#7
TECH Junkie
I'm running a lot more than 430rwhp with my setup and have raced and beaten a '01 Z06 before but I don't want any part of racing one from a punch.Our trucks have the aeodynamics of a brick and more than twice the frontal area of a Vette.You need to pick races where you have the advantage,the ZO6 has a 6speed so launching and shifting are critical his turning a low ET,from a punch you eliminate these variables,you play to his best advantage.
Trending Topics
#8
TECH Senior Member
iTrader: (7)
I agree, as others have stated above. To play with a Z06 do it on the bottom end. From a dig. I actually beat a modded Z06 once at the track through an 1/8 mile. Beat him off the line and had a better 60' time. He made all that up and and put a whooping on me by the time we went through the 1/4 mile lights. No way I could hang with these beasts from a punch.
#10
13 Second Truck Club
iTrader: (1)
Join Date: Jun 2004
Location: City by the Sea, Tx
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KySilverado
I agree, as others have stated above. To play with a Z06 do it on the bottom end. From a dig. I actually beat a modded Z06 once at the track through an 1/8 mile. Beat him off the line and had a better 60' time. He made all that up and and put a whooping on me by the time we went through the 1/4 mile lights. No way I could hang with these beasts from a punch.
At the shoot out last year in S.A. I actually took one off the line and held him off till the 330' then we were even till the about the 1000' ( yeah, surprized the hell outta me too...) but after that he began to pull HARD !!! like I just hit the brakes or something...He was 6 tenths faster on the big end. So I'll echo all others before me, if you want to beat one make it a short race from a dig and drive your *** off, cause you'll get raped from up top...