Cobalt map sensor
Trending Topics
#8
3 Bar. You will not find a direct replacement AFAIK. You will need an aftermarket sensor reading 0 - 5 volts and run a vac line to it from the intake manifold and then wire it up to the wires that go to your stock sensor.
2 bar - up to 14.5 psi boost.
3 bar - up to 29 psi boost
2 bar - up to 14.5 psi boost.
3 bar - up to 29 psi boost
#10
I don't think you have the right one. Ask KB or get the one listed above and I believe it is the one from the Cobalt that reads 2 bar. Mine reads fine to 13 psi boost but I have not run it out to a full 2 bar yet.