Fixed my belt slippage issues(pics)
#1
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Fixed my belt slippage issues(pics)
Talked to a member on here, worked for him, so I gave it a shot, now I have boost LOL. Had to pick up another atleast 50hp. So now I am boosting about 9 psi(open exhaust).. So I went from 5- to a solid 8+. Wasn't hard at all, just had to redrill one of the aluminum spacers in the idler pulley. Also didn't have to change belts....
John
John
Trending Topics
#10
Baltimore Whore
Thread Starter
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
If you look at the first pic, on the top and below the rad hose, you can see two stainless bolt heads, thats where they were..
Actually have an inch or so...
John
John