chevyridinhigh22

iTrader: (5)

Anyone know where these can be had? I had one shoot off like a rubber band installing 44#

chevyridinhigh22

iTrader: (5)

I know there at rockauto, but I cant find them individually.. part number 17113552 ac delco...
Im hoping some one here has found a different o ring, really dont want to spend 25. on a rubber o ring

00buckshot

iTrader: (5)

If it an injector o-ring, just use one off the old injectors. but if its a crossover line o-ring, advance usually has a fuel rail o-ring kit in stock for our trucks

chevyridinhigh22

iTrader: (5)

what in the help section? safe for fuel?, thanks!

fastnblu

iTrader: (2)

Inj. o-rings are $25?!? Here I thought 1/2 that. Guess I better be careful.

chevyridinhigh22

iTrader: (5)

Not the injector o ring, the o rings on the crossover fuel line.. There's one big one on each side of motor then a small one for return fuel on driver side...
I just visited o Reilly and they have a red box full of diff size orings that are oil safe and hopefully fuel safe as well .59 cents a piece I'll give it a shot!

marlboroman71818

they are not the correct size, trust me I have the same box. Look for a place that sells industrial seals and they can match them up instead of paying the dealer $45 for an oring kit you dont need!!!!!!

btw I know of a place here in baytown you can get them from

fastnblu

iTrader: (2)

I read that too.
I wanted to take my Maggie rails apart to powdercoat, so I thought I'd need need inj. O-rings & those for crossover too. Maggie told me no, just be careful.

lsxmalibu

iTrader: (24)

i have on off my old take off intake, give me your addy and ill send it to ya.

chevyridinhigh22

iTrader: (5)

Pm sent... Thanks Lsx!