Got my ebay roush tvs today
02-22-2010, 07:27 PM
#121
Adkoonerstrator
iTrader: (4)
Join Date: Nov 2001
Location: Deep in the seedy underworld of Koonerville
Posts: 21,436
Likes: 0
Received 3 Likes
on
2 Posts
Time to do like TB asked and get this thread back on track.
02-22-2010, 07:52 PM
#122
Adkoonerstrator
iTrader: (4)
Join Date: Nov 2001
Location: Deep in the seedy underworld of Koonerville
Posts: 21,436
Likes: 0
Received 3 Likes
on
2 Posts
So on to helping you guys out with these chargers already!!!
On the coolant crossover tube. Can you just cut the tube on the stocker and clamp some rubber hose over the ends? Not glamorous but, effective! Even GM did this on the last Camaros!
I know I've seen some ghetto rigged 4--3 bolt TBs done on here. Someone has to remember what thread it was in! Someone find the link and post it! Plus, one member offered to make some for you guys, might want to PM him.
On the coolant crossover tube. Can you just cut the tube on the stocker and clamp some rubber hose over the ends? Not glamorous but, effective! Even GM did this on the last Camaros!
I know I've seen some ghetto rigged 4--3 bolt TBs done on here. Someone has to remember what thread it was in! Someone find the link and post it! Plus, one member offered to make some for you guys, might want to PM him.
02-22-2010, 08:09 PM
#124
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Location: Cape Coral,FL
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I was merely trying to seek the path what I thought was least resistance by asking magnacharger if they would sell me some parts for my project.
Not start world war 3.
Back on topic now
I'm working out the tb adapter with another member of this forum.
Not sure if I'm gonna try to get this tmap(iat and map in one) sensor and harness that roush recommends or use my exsiting map sensor and add an iat sensor to the intake. Any recommendations?
The water crossover can be "massaged" to work.
Not start world war 3.
Back on topic now
I'm working out the tb adapter with another member of this forum.
Not sure if I'm gonna try to get this tmap(iat and map in one) sensor and harness that roush recommends or use my exsiting map sensor and add an iat sensor to the intake. Any recommendations?
The water crossover can be "massaged" to work.
Last edited by 06vortecmaxxx; 02-22-2010 at 08:10 PM. Reason: spelling
02-22-2010, 08:21 PM
#126
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Location: Cape Coral,FL
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I realize this, from what I've seen the supercharger manufactures move it to the intake.
They have you cut and splice the wire from the IAT sensor in the map sensor to a new IAT sensor mounted in the intake.
I was thinking It might be a little cheaper to buy a separate IAT sensor and harness than the Tmap sensor and harness.
They have you cut and splice the wire from the IAT sensor in the map sensor to a new IAT sensor mounted in the intake.
I was thinking It might be a little cheaper to buy a separate IAT sensor and harness than the Tmap sensor and harness.
02-22-2010, 08:23 PM
#127
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Location: Cape Coral,FL
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I'm still looking for nnbs square fuel rails if anybody has a set.
I don't have enough posts for the classified section or I'd post a WTB add.
I don't have enough posts for the classified section or I'd post a WTB add.
