Gt 67 ?
#1
Gt 67 ?
Guys, im debating on upgrading my turbo to a gt 67. Right now i 'm running 8 psi with really great I.A.T's. (usually 5 -12* over ambient) , In the future id like to run more boost and down the road a forged motor, But for now at my current level will i notice a performance gain with a turbo upgrade? I dont want to lose any low end either--Thanks, TIM
#3
How do I change this text
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
Still got the 5.3? What turbo do you have now? My 60-1 witha GT whell was pretty good with the 5.3, and ran on the 6.0 for a bit, now I have the GT67, which moves a bit more air at a lower temp, but higher up in the rpm range.
Basicly with the 6.0L and the 60-1, sitting at a light, stabbing the gas would equal tire smoke coming on about half way through the intersection. throw a GT-67 on and now it is on the other side of the intersection.
I'd start saving up for a good built engine and then buy the turbo.
Basicly with the 6.0L and the 60-1, sitting at a light, stabbing the gas would equal tire smoke coming on about half way through the intersection. throw a GT-67 on and now it is on the other side of the intersection.
I'd start saving up for a good built engine and then buy the turbo.
#4
yeah, still the stock 5.3 and 60-1. the truck runs great now, just wandered if the 67 would better compliment my truck now or if i should just wait for down the road when i get a forged 6.0. I know i dont have the 60-1 working too hard now @ 8 psi. Thanks for the input.
#5
I just did a switch from my T60-1 to a GT67 last week. Maybe this will show some differences. The 60 gave me boost drop issues but the 67 holds boost great. I also will be upgrading to forged internals and this swap was to prepare for that. The 67 runs lower EGT's. I dropped by about 75 degree's.
I've lost about 1/2 second 0 to 60 at 5 to 7psi. But again, the unit is only a few hours old now so it's still pretty tight. The "whistle flutter" you hear a little is my turbo oil alarm. (I've now fixed that).
My 4x4 QC weighed in at 6000#.
This was my latest T60-1 video. Notice all the trans shifting at take off. 1st to 2nd, back to 1st, back to 2nd.
http://media.putfile.com/wg-vent-to-atmosphere
This is an equivalent video with the new GT67 (about an hour of use on it)
http://media.putfile.com/GT67-from-idle
And this is putting a SLIGHT rev on it with the GT67. I probably let it build about 500rpms before flooring it. The street was straight, notice how long my wheel was cocked to the side. You can watch my rpms and see that it spun through about 50 to 55mph before it caught. 6psi.
http://media.putfile.com/GT67-at-a-slight-rev
I've lost about 1/2 second 0 to 60 at 5 to 7psi. But again, the unit is only a few hours old now so it's still pretty tight. The "whistle flutter" you hear a little is my turbo oil alarm. (I've now fixed that).
My 4x4 QC weighed in at 6000#.
This was my latest T60-1 video. Notice all the trans shifting at take off. 1st to 2nd, back to 1st, back to 2nd.
http://media.putfile.com/wg-vent-to-atmosphere
This is an equivalent video with the new GT67 (about an hour of use on it)
http://media.putfile.com/GT67-from-idle
And this is putting a SLIGHT rev on it with the GT67. I probably let it build about 500rpms before flooring it. The street was straight, notice how long my wheel was cocked to the side. You can watch my rpms and see that it spun through about 50 to 55mph before it caught. 6psi.
http://media.putfile.com/GT67-at-a-slight-rev
Last edited by hemifever; 06-10-2006 at 12:28 PM.
Trending Topics
#8
Originally Posted by TIM Z
thanks for chiming in HEMIFEVER, let me know how the 67 works out for ya, i DONT want to lose any bottom end and am thinking i'll just wait till i want to run more boost to upgrade turbos.
#10
Originally Posted by TIM Z
i need more info on that. but i'm assuming its larger than the 67 ?