pkozera

iTrader: (26)

I just bought a mp112 with a 6.0 lq9 that was in a boat that got caught in a house fire a friend bought the set up for the motor and i got the charger for labor we resealed the motor and it runs great so to the sc it needs some parts to swap over to a 99 silvy so i figured easy so i call magnuson products and they tell me it wont work unless i spend 3500 on it but they will sell me a brand new kit for 3800. My question is does anyone know where i can go to find the parts i need to complete this task if not and they still refuse to sell me the parts then i will you tube a smash and melt of this thing and never install one of there kits ever again. This is pissing me off they make the parts i need the parts sell me the mf parts dont need them to tell me send it in and fix it for 3500. Magnuson i have to call bullshit i can fix it just need some parts.

03sierraslt

iTrader: (22)

Ok- First off, I was not aware there was such a blower as a MP1200. You may want to double check that. Second, going back to the first thing its hard to say what the deal is with them selling you parts seeing as though I have never heard of that blower. What is it that you need? 3500 to repair but only 3800 to buy new?

pkozera

iTrader: (26)

sorry i found that num stamped into it and if you do a goggle search on it it pulls it up under superchargers. Sent some pics to magnuson did not give me a model num but told me no good it was on a 05 mastercraft boat and has the tb straight out the back and i need the elbow that comes around the side towards the stock airbox some bearings a pulley,seals,input shaft which messed up when i was removing the pulley dam the luck. When i sent the pics the guy i talked to Tim told me i had a piece of **** just from the pics which i thought was wrong since i am the customer wanting to spend some money to use there product but not 3500. This is my rodeo with fi so bear with me on incorrect terms or numbers.

03sierraslt

iTrader: (22)

Can you post up some pictures so we know what you have? It could be a model that they no longer make. Also if we know what you have there is a chance someone on here could help you out, there are allot of Magnacharger products on this board.

6.055chevy

iTrader: (1)

sounds just like Magnuson. They are jerks to say the least. There service rank right down there with the toilet. I have called them twice never returned one phone call. The guy I did talk to wouldn't help on parts either. I haven't had time but I'd try going through one of there dealers you might have better luck. Look them up on there web sight.

I think if you bought a new system and broke something they would tell you you would have to buy a new kit again.

You might have mp112 not mp1200

old motorhead

iTrader: (10)

My experience has been totally opposite. They couldn't have been more helpful anytime I've called or emailed.

To the OP.....take a step back, maybe a deep breath, and try agian monday morning. I'd bet, if the parts are available, they'll fix you up.

AKlowriderZ71

iTrader: (22)

All the guys that are knowledgable and helpful are at SEMA. Have some patience. I've never had any negative experience in my dealings with MagnaCharger.

Like the other guys said, post pics of what you have, and the parts you're looking for. Lots of Maggie support here.

moregrip

iTrader: (8)

Let's see some pics!

trever1t

iTrader: (14)

gotta be a 112 huh? I might have a stock J-tube, don't remember if I sold it or not.

03sierraslt

iTrader: (22)

I am thinking 112 also but if we could see some pictures then we can get a better idea of what he is working with.