high IAT temps
#1
Teching In
Thread Starter
Join Date: May 2008
Location: West Des Moines IA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
high IAT temps
I have recently put a KB 2.6 super charger on my 5.3 and I have a couple of issues to solve. One is high iat temps is meth my only option.
#3
On The Tree
Join Date: Jun 2007
Location: St George UT
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Hi IAT's are a real problem with the twin screws if you overdrive them to much. My 2.4 was hitting 270 degrees before the intercooler. That is why I switched to the turbo's. If you can keep the blower speed under 1.5 times engine speed it will help.
#4
8 Second Truck Club
iTrader: (32)
I'm a firm believer in the reduced IAT's that meth provides. Awesome power increase for the price, at least on my set-up. I run an Alky control kit and it can be 90 degrees outside and my IAT's never go above 70* during a full throttle run. I have a procharger though, so mine aren't nearly as high as yours to begin with. I run straight meth and its pretty much turned up all the way.
Trending Topics
#9
Teching In
Thread Starter
Join Date: May 2008
Location: West Des Moines IA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I have had the set up for about a week. A full pull to 6200 170 degrees starting at 109 I started to try and check everything. i don't know if the coolant pumps working right. i pulled the cap and it seems to be aerating the sytem. has anybody seen that be for.