Injector help for the 2.3l twin screw
12-12-2009, 05:55 PM
#1
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
Injector help for the 2.3l twin screw
I need to know what injectors I jus bought?
What are the pro & cons for them in my build?
The main question I guess is will they provide enough fuel?
I bought these from a member on here that claims they are 60's at 58psi fuel pressure.I believe otherwise so I would like you guys help me decide.
The platform is a 4.8l with 212/218 .531 .531 114lsa W/1.8's mildly ported 241 heads which brings CR to about 8.8to1,Long tubes.A 2.3l lysholm twin screw puttin out 16-17 lbs.of boost.Right now at 11lbs I firmly believe its putting down around 500rwhp on a less then par tune.All this will be on pump gas.Return fuel system.
The injectors in ? are part#01D030B they have a blue stripe EV1 connector All black Lt1 style body.
What are the pro & cons for them in my build?
The main question I guess is will they provide enough fuel?
I bought these from a member on here that claims they are 60's at 58psi fuel pressure.I believe otherwise so I would like you guys help me decide.
The platform is a 4.8l with 212/218 .531 .531 114lsa W/1.8's mildly ported 241 heads which brings CR to about 8.8to1,Long tubes.A 2.3l lysholm twin screw puttin out 16-17 lbs.of boost.Right now at 11lbs I firmly believe its putting down around 500rwhp on a less then par tune.All this will be on pump gas.Return fuel system.
The injectors in ? are part#01D030B they have a blue stripe EV1 connector All black Lt1 style body.
Last edited by SincalT/A; 12-12-2009 at 06:01 PM.
12-13-2009, 12:13 PM
#4
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
You are correct.
I know its going to be a struggle to try and get this resolved by the member too.So far I told him I would ship them back at no cost to him if he refunded my money.I think this is a more than fair offer.So does anyone want some brand new 42lb@43.5psi. injectors cheap?They are 48lb.@58psi btw.
12-30-2009, 09:52 PM
#6
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Wow, I think I have heard issues with this guy before, but can't be 100% sure since we have had a bit of shitty sellers here lately.. Hope you get things straightened out.. 
12-30-2009, 10:01 PM
#7
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
I think ill bump his for sale thread.
Also if anyone has info on if the injectors in ? would support the power im lookin to put down.(Which is about 650-700 fwhp)I would appreciate it.I think I know the answer jus making sure they're not magical 42's.
Also if anyone has info on if the injectors in ? would support the power im lookin to put down.(Which is about 650-700 fwhp)I would appreciate it.I think I know the answer jus making sure they're not magical 42's.
Last edited by SincalT/A; 12-30-2009 at 10:07 PM.
Trending Topics
12-30-2009, 10:06 PM
#8
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Holy **** your making that kinda power with a 4.8?? 42's arn't going to handle that.. 60's might be up in the IDC's Last time I logged my 60's were at a max of 74% and I am not no 700 fwhp
12-30-2009, 10:11 PM
#10
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
I am currently running a 3 3/8 pulley.This puts me around 11lbs.The 2 7/8 I plan to run should bring boost up to 15-16 and no it will not slip.