regency

iTrader: (15)

So as the title states I want to pick your brains...!!

Lets make paper build that in perfect situations will produce 900-1000 rwhp
Starting with a 408 ci short block, lets put heads, intake, and fuel. Then we will need to size the turbo and all piping.
I have read some about the turbos and setting them up but know next to nothing about doing it because ive never done anything with them.
I know its more than enough motor to do it but my thinking was to not have to boost as hard and make the engine last longer.

GMCtrk

iTrader: (27)

370
S480 with race cover
Stock heads and intake

regency

iTrader: (15)

What psi?

GMCtrk

iTrader: (27)

23-25

I see 20-22psi down the track which is around 950

Gadgetized

iTrader: (9)

I made 955RWHP at 22 PSI. Stock cover cast wheel. I would also suggest the race cover. I will more than likely be switching to an 84mm billet wheel and V2 race cover. That should be enough to put me well over 1000 if i want to push it.

Blown06

iTrader: (32)

I think you missed the 408 part

George C....

For only 900 rwhp goal a stock strong rod with a JFR cam will do it with studs and gaskets

Lil brother PI

https://www.performancetrucks.net/fo...inside-542740/

408 stock heads prbly get to the 1k mark if it they push it

George C....

Parish in 2006 did over 1000 on a 408 with stock heads on pump gas........

Lil brother PI

That was 10 years ago and way ahead of the game back then we have come a long ways