livernois turbo guys burning plug wires
04-24-2009, 03:16 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jan 2004
Location: Chi-Town
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
livernois turbo guys burning plug wires
Im on my second set of wires now, tomorrow im going to try to reroute # 2 4 6 wires around the manifold using LT1 wires.
Just wanted to see what you guys did to avoid burning these 3 wires all the time and to see if there is something really trick i could do im not seeing.
Just wanted to see what you guys did to avoid burning these 3 wires all the time and to see if there is something really trick i could do im not seeing.
04-24-2009, 04:20 PM
#2
I have the MSD truck plug wires on mine with some sleeves on them and just bent them away and off the manifold. Its a pain and I went through a few sets and tried different lengths and all but so far the MSDs with the sleeve is the best I have found. I will try and get pics tonight if you need
04-24-2009, 04:50 PM
#3
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jan 2004
Location: Chi-Town
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
thats what ive been running, MSD wires, i actually have 2 sleeves on the 2 closest. The first time, i had taking everything apart and never notice they where burnt till on the dyno. The sleeves looked brand new but the wire was burnt inside the sleeve. I figured around the manifold was the best way.
