Lysholm 2011 4.8 dyno today
#1
Lysholm 2011 4.8 dyno today
Decide to baseline my truck before I did my LPP headers. My previous dyno was done in Hawaii so I wanted the numbers to come from the same dyno and conditions.
Hawaii dyno 400 whp 404 ft lb tq
Georgia dyno 391 whp 454 ft lb tq
Temp was 70 degrees and had a mix of 89 and 93 in the tank. No new mods since Hawaii dyno. Both dynos were on Mustang Dyno's
JJspec dyno - YouTube
Enjoy
Hawaii dyno 400 whp 404 ft lb tq
Georgia dyno 391 whp 454 ft lb tq
Temp was 70 degrees and had a mix of 89 and 93 in the tank. No new mods since Hawaii dyno. Both dynos were on Mustang Dyno's
JJspec dyno - YouTube
Enjoy
#4
Both were at 9 psi. I believe you are correct about the torque convertor. THe first dyno in Hawaii was during the initial tuning session. THe dyno today was straight off the street onto the dyno,unplug the rear wheel speed sensors, stick it in 3rd and run it.
It will be nice when I get the truck to Henson in Birmingham to get it fully tuned including transmission. That will be after cam, springs, and stall convertor.
It will be nice when I get the truck to Henson in Birmingham to get it fully tuned including transmission. That will be after cam, springs, and stall convertor.