Methanol Pre-Turbo
#1
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
Methanol Pre-Turbo
I was reading over on YellowBullet and suprised alot of the high HP guys are spraying a small nozzle pre turbo.
Says it makes the turbo more efficent?
never seen anyone on here use methanol Pre and post turbo.
Says it makes the turbo more efficent?
never seen anyone on here use methanol Pre and post turbo.
#3
TECH Resident
iTrader: (1)
Join Date: Mar 2005
Location: OH
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
there is some benefits to pre turbo, but its very corrosive stuff. i would think it would puddle in the bottom of intercooler. i very small nozzle may work. i just use one nozzle right after intercooler and another 12" from tb.
#6
TECH Fanatic
iTrader: (2)
Join Date: Oct 2006
Location: slidell, LA
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
There has been TONS of debate over this as to whether it will damage the turbine or puddle. The general consensus I found was that you want to have a good nozzle that is properly sized and is pointing directly at the nut on the turbine. As far as puddling, I hear it doesn't do it and no worries about the meth corroding anything. It will be vaporized in the compressor. When I do meth I will be calling Julio at alky control and he will more than likely recommend one preturbine and 2 pre throttle body and that's what ill be doing
Last edited by o2camaross; 07-12-2012 at 08:36 AM.