FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection

Milky oil???

Thread Tools
 
Search this Thread
 
Old 12-29-2008, 12:41 PM
  #1  
12 Second Truck Club
Thread Starter
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default Milky oil???

I have milky oil comming from my vent tube off the passangers side valve cover. Its never really needed a catch can until now. My check engine light came on and turbo seems to be spooling alot slower than normal. My guess is a head gasket. Any other suggestions????
Old 12-29-2008, 12:41 PM
  #2  
12 Second Truck Club
Thread Starter
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

Might just be time to plop a 6.0 in there
Old 12-29-2008, 12:58 PM
  #3  
TECH Fanatic
iTrader: (16)
 
SincalT/A's Avatar
 
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 0 Likes on 0 Posts
Default

That happens also cause condensation buids up in the engine.Especially builds up when the coolant temps are kept to a minimum.
I would wait till you actually have milky oil when you drain it.
I have seen this many times in all of the performance vehicles that I have owned.I believe the condensation never really evaporates fully like on a otherwise stock vehicle.
Old 12-29-2008, 01:00 PM
  #4  
TECH Regular
iTrader: (1)
 
Midnightrider's Avatar
 
Join Date: Sep 2007
Location: Celina, Tx
Posts: 495
Received 10 Likes on 4 Posts
Default

catch can is always a good ideal when fi
Old 12-29-2008, 01:01 PM
  #5  
12 Second Truck Club
Thread Starter
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah i pulled the dip stick and it looks to be normal
Old 12-29-2008, 01:21 PM
  #6  
Truck Sponsor
iTrader: (12)
 
TrickTurbo's Avatar
 
Join Date: Sep 2006
Location: Wichita Falls Tx.
Posts: 4,466
Received 62 Likes on 50 Posts
Default

Your just looking for an excuse to get this 6.0 I have here aren't you. LOL
Slow spool, might be cause your use to it after 2+ years, might need to turn the wick up a little more.
Old 12-29-2008, 01:34 PM
  #7  
TECH Regular
iTrader: (1)
 
Midnightrider's Avatar
 
Join Date: Sep 2007
Location: Celina, Tx
Posts: 495
Received 10 Likes on 4 Posts
Default

Originally Posted by TrickPerformanceProducts
Your just looking for an excuse to get this 6.0 I have here aren't you. LOL
Slow spool, might be cause your use to it after 2+ years, might need to turn the wick up a little more.
the 6.0 that you have wouldnt happen to be forged would it ?????
Old 12-29-2008, 01:34 PM
  #8  
TECH Enthusiast
iTrader: (12)
 
TurboJohn6's Avatar
 
Join Date: Oct 2005
Location: Bethlehem, Pennsylvania
Posts: 539
Received 4 Likes on 4 Posts
Default

I would keep a close watch on your coolant level. You could do a cylinder leak down check or pressure test your cooling system if you have the tools to do it. If not, keep checking the coolant level.
Old 12-29-2008, 01:39 PM
  #9  
12 Second Truck Club
Thread Starter
iTrader: (7)
 
WJ MARK's Avatar
 
Join Date: Jun 2006
Location: colorado above 6000 ft.
Posts: 2,093
Likes: 0
Received 0 Likes on 0 Posts
Default

well i also have a coolant leak off the heater core connectors, so that need to be fixed before i can keep an eye on the level
Old 12-29-2008, 01:43 PM
  #10  
TECH Senior Member
iTrader: (7)
 
KySilverado's Avatar
 
Join Date: Jun 2004
Location: Central Kentucky
Posts: 5,446
Likes: 0
Received 7 Likes on 7 Posts
Default

There are kits you can buy that will test the coolant for combustion gases present in it. Thats how I diagnosed a very small head gasket leak a few years back with a Toyota.


Quick Reply: Milky oil???



All times are GMT -5. The time now is 05:49 PM.