Ordered the D1sc...Got some questions
#1
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Feb 2006
Location: Kenosha WI
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
Ordered the D1sc...Got some questions
So i purchased a brand new D1sc setup...
-d1sc head unit (polished)
-Brackets
-Race bypass
Total: $3400 shipped
But im going to need a FMIC....What size is the biggest you can fit up front by the front bumper brackets?
What size pulley am i going to need from to hit 12# at 9.3-1 CR and mods in my sig?
What size injectors should i run? Are 60# injectors going to do it? I plan on running 15# down the road on a race tune.
Im pretty excited about this portion of the build. Ready to really crank it up on the new motor. see what she can really do.
-d1sc head unit (polished)
-Brackets
-Race bypass
Total: $3400 shipped
But im going to need a FMIC....What size is the biggest you can fit up front by the front bumper brackets?
What size pulley am i going to need from to hit 12# at 9.3-1 CR and mods in my sig?
What size injectors should i run? Are 60# injectors going to do it? I plan on running 15# down the road on a race tune.
Im pretty excited about this portion of the build. Ready to really crank it up on the new motor. see what she can really do.
#3
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
I would step up to 70's. I am not running but 9-10 psi on my 6.0, have seen IDC as high as 78%.. I will try and hunt down my ic measurements for you(can't get them now truck is burried in snow.. Mine is about as wide as you can go without cutting... a 3.8-9 pulley should get you close to 11psi( don't hold me to that should be close) Your stock intake is fine, unless you want to do a tbss, 90mm swap, or a vic jr setup.. I am running the stock truck intake now, but on the 370 it will be the vic jr, along with a 90mm TB
This is the way I mounted mine, it is pretty simple, strong, neat and effective..
This is the way I mounted mine, it is pretty simple, strong, neat and effective..
Last edited by Mangled03gmc; 02-19-2010 at 06:06 PM.
#6
TECH Resident
iTrader: (36)
Join Date: Dec 2006
Location: Lafayette, CA
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
A 27x12x3or4 is the biggest you can fit between the bumper supports.
If this link gets deleted, do a search on eBay for CRXracing. i've used them a half a dozen times. They work great and fit perfect.
http://cgi.ebay.com/ebaymotors/CXRac...Q5fAccessories
Rick
If this link gets deleted, do a search on eBay for CRXracing. i've used them a half a dozen times. They work great and fit perfect.
http://cgi.ebay.com/ebaymotors/CXRac...Q5fAccessories
Rick
#7
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Feb 2006
Location: Kenosha WI
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
A 27x12x3or4 is the biggest you can fit between the bumper supports.
If this link gets deleted, do a search on eBay for CRXracing. i've used them a half a dozen times. They work great and fit perfect.
http://cgi.ebay.com/ebaymotors/CXRac...Q5fAccessories
Rick
If this link gets deleted, do a search on eBay for CRXracing. i've used them a half a dozen times. They work great and fit perfect.
http://cgi.ebay.com/ebaymotors/CXRac...Q5fAccessories
Rick
I was leaning toward the 60lb injectors because i always see them for sale cheap. But i dont want to run out of injectors. I just dont see alot of people running the 70lb injectors. I figured the 96lb would be over kill and kill my idle and fuel atomization.
Trending Topics
#8
TECH Senior Member
iTrader: (26)
Thanks Rick.
I was leaning toward the 60lb injectors because i always see them for sale cheap. But i dont want to run out of injectors. I just dont see alot of people running the 70lb injectors. I figured the 96lb would be over kill and kill my idle and fuel atomization.
I was leaning toward the 60lb injectors because i always see them for sale cheap. But i dont want to run out of injectors. I just dont see alot of people running the 70lb injectors. I figured the 96lb would be over kill and kill my idle and fuel atomization.
#10
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Feb 2006
Location: Kenosha WI
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
Ok im going with the 27x12x3 FMIC....but how is everyone running the intercooler piping? Ill be running 3" pipe but when do you guys increase to 4" to go to the throttle body? What kind of fitting am i going to need. Im going to get a universal intercooler kit off ebay...but they have a **** load of them. I want to make sure i get all the parts needed the first time. Also i will not be running a MAF sensor so leave that out.