PCV on PD blowers
#11
TECH Veteran
iTrader: (5)
I thought I would bump this thread up since what I have come up with for my truck pertains directly to PD blowers. See the diagram below for diagrams and airflow in idle and wot states. How the system acts in between will depend on the cracking pressure of the check valve and MAP state.
I currently have the vented catch can installed with -10 from the pass cover and connected to the stock pcv valve with 3/8" hose on the driver side. Once I find a 5/8" inline check valve with low cracking pressure, I will pull the blower off and finish the driver side with the -10 and 3/8" hose to blower inlet. As it sits now, I still get fumes at idle but it no longer blows oil out of the filter onto my headers.
I currently have the vented catch can installed with -10 from the pass cover and connected to the stock pcv valve with 3/8" hose on the driver side. Once I find a 5/8" inline check valve with low cracking pressure, I will pull the blower off and finish the driver side with the -10 and 3/8" hose to blower inlet. As it sits now, I still get fumes at idle but it no longer blows oil out of the filter onto my headers.
Last edited by BigKID; 04-17-2012 at 02:01 PM.
#12
Last edited by Rudy91040; 04-23-2012 at 10:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
calsdad
8-Lug Truck Performance
34
06-14-2023 11:07 PM
lucas287
Tuning, Diagnostics, Electronics, and Wiring
31
01-12-2021 06:18 AM