Picked up new heat exchanger today
#11
Originally Posted by moregrip
when I ran dual, dual pass H\E'rs (probably equal surface area to your new piece) I saw a 3-4 deg drop in IAT's at the track
#13
How do I change this text
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
Well summer must be around the conner because Whippled 496 is starting to screw around with his IAT's again........
J/K , I think you should install them both. ( you know you will later on anyway. lol)
J/K , I think you should install them both. ( you know you will later on anyway. lol)
#14
Originally Posted by Wilde Racing
Well summer must be around the conner because Whippled 496 is starting to screw around with his IAT's again........
I picked up something for you. I got it on sale at Target, its real nice....
LMAO!
God I love that movie!
#15
finally got everything installed. Seems to be making a pretty nice difference from what I can tell. It was about 70* out today and cruising temps were about 83. When i stopped and let it idle for 10 minutes it went up to 102*, then fell quickly to 85* after driving for about 2 minutes. The big difference seems to be how quickly it drops when i start driving. I want to get a little more time under my belt before i go spewing off any real numbers but so far I am pretty happy. With the old H/X i would see cruising temps in the 90's when the ambient temps were near 70*, and now cruising temps are in the 80's. Of course these measurements were all taken after driving for 30 minutes to allow any heat soak and for the engine/tranny to come up to operating temps.
I had to flip the tranny cooler bracket upside down so the tranny cooler could push back a little closer to the A/C condenser. I have about a 1/2" between the tranny cooler and the heat exchanger and about a 1/2" between the grill and the heat exchanger.....so she just barely fit in there, but it all bolted up nice and clean. I may have to paint it black, not sure if I like that big silver thing screaming at me from behind the grill. The only thing I am worried about is how it totally blocks the tranny cooler. The tranny never went above where it did before after driving around for an hour or so today, so i think its okay. Of course I got some pics.......
Here is a shot of the new reservoir, i holds about 3 gallons I think.
I had to flip the tranny cooler bracket upside down so the tranny cooler could push back a little closer to the A/C condenser. I have about a 1/2" between the tranny cooler and the heat exchanger and about a 1/2" between the grill and the heat exchanger.....so she just barely fit in there, but it all bolted up nice and clean. I may have to paint it black, not sure if I like that big silver thing screaming at me from behind the grill. The only thing I am worried about is how it totally blocks the tranny cooler. The tranny never went above where it did before after driving around for an hour or so today, so i think its okay. Of course I got some pics.......
Here is a shot of the new reservoir, i holds about 3 gallons I think.
#17
Admin
iTrader: (22)
Originally Posted by Wilde Racing
Well summer must be around the conner because Whippled 496 is starting to screw around with his IAT's again........
J/K , I think you should install them both. ( you know you will later on anyway. lol)
J/K , I think you should install them both. ( you know you will later on anyway. lol)
#20
Originally Posted by 03sierraslt
Ya, he should just give up on it and put a DMAX intercooler on. Some dude tryed it on here but he didnt know what he was doing, maybe whippled can figure it out.
I remember that guy, he was one of the coolest guys around, i think he got ran over by a horse and buggy on the way to Amish-a-palooza.