Having hell installing this factory procharger 2 core intercooler. Any pictures of your install? Need some ideas for my 05 sierra denali.

Thanks
eddie

 

I have pics of my 3 core front mount! I never liked the horizontal design from procharger,so I moved mine behind the grille.I like it much better and it took a couple bends out.I also got rid of all the rubber elbows that like to balloon under boost.It made boost come on faster and peak a little higher.

 

Send me some pictures.

 

Post pics online, I'd like to see your FMIC setup as well

 

I decided to copy off of Mangled (I be riding dirty)s truck. I like how the ic is vertical and mounted in the bumper (airdam). The ic im running is a procharger with the inlet is at the bottom and the outlet at the top. With that setup the outlet doesnt clear the passenger side frame. I have my ic at a welding shop. Im having the outlet moved to the bottom of the ic to clear the frame. I hope it turns out ok. We'll see? When it comes back i can start on my install. Cant wait!

 

Here are some pics,I ended upswitching to an ebay intercooler that had the inlet and outlet on top and all hard pipe without rubber elbows,but now I am going air/water so I don't have this setup anymore.when I did this I wanted to get plenty of air through the grille since my bumper cover didn't seem to have much airflow for the intercooler. I offset it to try not to obstruct the radiator too much.

 

 

I like this mount mine ...I may try to do something like this with Mine

 

I like the set up of allballz but im scared to block the radiator pulling a 5000lb boat in louisiana heat. I hope to have my ic back by weds. Ill take some pictures when i get it.

 

NEVER had ANY issues with a horizontal mount FMIC...jus' sayin'...