fcompean

i have an 08 NNBS RCSB and i decided its time for a stall converter...i have a D1SC with about 13lbs of boost on a stock 5.3..my tranny is a 4L60E stock besides a vette servo and a 40K tru-cool.

my truck feels real sluggish on low RPMs so i decided to get rid of that stock verter..i found a YANK SS3600 "Nitrous" Converter..will this work for my setup???

Iam new to Stall Converters so please help me out...

jrmchevyman

Is the Yank SS3600 new or used? A lot of guys use the SS3600 or similar 3600 converters with their procharger setups in these trucks. You might want to start saving up for a built Trans or keep some money saved up for when the stock trans goes out.

08cheyennesc

iTrader: (2)

Why not the SC3000? And Dave can make it a 3600. Either way,you're going to wish you had done it before,prochargers love stalls.

CC05

iTrader: (2)

Sell the 60E while it's still in one piece and use that cash to pay for an 80E and 3600 or higher stall. The 60E won't last and a stall is stupid essential for that D1.

fcompean

Its a used stall..guy say it only has 1000 miles. It came out of a 99 trans am..