02RedHawk

iTrader: (17)

Hey All,

Since the owners of the 'limited' GM-Roush TVS Supercharger kits have no customer support from Roush, certainly this forum will now be even more important to use for sharing information, install tips/tricks, etc (as we've already seen in the other owners-specific threads!). In order to help accomplish this, I'm hoping this thread can have all of us owners "chime in" and thus create a master-list of owners for ease of future conversations/sharing. With an estimated 75ish kits made available, I have to believe there's a good number present on this forum. Simply put, if you own one, please post what vehicle you have/will-be installing it onto!

Me:

R-TVS1900 Kit (awaiting in basement)
Truck: 2010 Chevy Tahoe 5.3L V8, LT-Z71 4WD (GM order pending)


I also think creating a master-thread each for the pre-2007 NBS and 07+ NNBS trucks are warranted, each containing specific installation / parts tips 'n tricks - a compiled and summarized pair of threads that pulls from the lessons-learned in the other owner-specific installation threads.... Like the idea? If so, I'll create them tomorrow.

TIM Z

iTrader: (12)

R TVS 1900

Going on my 2000 Z71 LQ4 6.0
Custom grind Comp Cam 219/231-113.5, PAC 1518 springs
Edelbrock DBC 90mm TB/ K+N CAI
60lb Deatchwerks injectors, NNBS fuel rails/ Fuel Labs boost reference fuel regulator.
TJ Tuned.
NNBS waterpump
SS Longtube headers


Install next couple days as parts roll in.

Great idea for a thread.

smokeshow

iTrader: (16)

Guilty!

Its on the truck in my sig.

01 BERGER CAMARO SS

iTrader: (77)

Checkin In""

09 Silverado RCSB 5.3/Auto

Roush TVS1900
Volant CAI
Ported TB
LPP Lt's
Custom stainless exhuast with 22" Magnaflow
File Custom Tuned

Awaiting To B Installed
Snow Stage 2 Meth Kit
Yukon Posi & Gears

P.S. Tranny isn't liking the setup..lol..

schino

iTrader: (14)

ive got one waiting to go on my 2008 4.8

Low_LSX

iTrader: (33)

I have one in storage for a future project.

jiar577

iTrader: (2)

R-tvs1900 is going on my '06 5.3 rcsb 4x4. Right now I'm running Comp 212/218 low lift cam, 4.11 gears, Dough Thorley tri-y headers, BB tuned. I've read the cam will work ok with the blower but I'll change it if needed.

I still need to find which injector adapters & TB adapter I should use, so this thread can be helpful. Any idea?

Blower should arrive this week.

skipperdaddy

iTrader: (7)

r tvs 1900 already installed on 2009 gmc sierra cc 5.3l, 6l80e, 3:42s, obx lts and ory, magnaflow si/do, mac cai, pat g spec'd cam, patriot xtreme dual valve springs, truckshope tune

eric36

iTrader: (2)

I got one for the next project

duecedad

Couldn't pass this up!