BOLLAS

I am about to instal a MagnaCharger and the instructions say to use the stock plugs. Is this what everyone has done . I know on my vette with my ProCharger I was useing NGK TR6's gapped at 35' . I have not seen much talk about the plugs.

Any feed back on this...

dewmanshu

iTrader: (4)

Stock setup from Maggie and the stock plugs will be fine. But most will upgrade to the cooler plug like the TR6, especially once they leave the comforts of Maggie's warrantied setup (upping the boost). I run the Tr6's and am around 8.5# of boost.

trever1t

iTrader: (14)

TR6's here too on 10lbs.

WorkTruc

iTrader: (8)

TR6's here on 8#'s of boost

03sierraslt

iTrader: (22)

TR6's as well, usually 7lb but I have had it up to 13lb with them in and no issues. ( if I did it often I would go one colder)


TR6's should be good for you. I would ditch the stock plugs, i dont care for iridium plugs with boost.

D-GTO

So everyone likes TR6 but what are you guys gapping at?

dewmanshu

iTrader: (4)

they should come gapped at .035. Check them to make sure.

terravast4

iTrader: (25)

Tr6 at .35 with 10 lbs

nonnieselman

iTrader: (10)

Wow, thats a big gap!!!

haha jk..


TR6s gapped at .035 here.. 5#, 5# and nitrous.. and 7#so far

PSM

iTrader: (3)

Why is that?

I went and bout the tr6 ix because I don't feel like changing spark plugs every other oil change. I didn't think the iridium was worse for boost