Standalone fuel tank and over flow tank.:)
03-23-2008, 09:25 PM
#1
Standalone fuel tank and over flow tank.:)
Here are some new tanks we just finished up. The fuel tank is for a standalone nitrous system, but we can also build these for water intercoolers, and water/meth tanks.
It will mount up using short self taper screws, the regulator does have to be bolted up after the tank is installed.
Customer wanted an over-flow tank to match.
And had to have a low level sendor added. The large thread hole is where that will go. All the stock hoses will clamp right up, and bolts into the stock location
. Both tanks have baffling built in to aid in slush and bouncing sensor probes.
Tanks where upgraded to polished.
Thanks Brian for the order, hope you like your tanks...
later
It will mount up using short self taper screws, the regulator does have to be bolted up after the tank is installed.
Customer wanted an over-flow tank to match.
And had to have a low level sendor added. The large thread hole is where that will go. All the stock hoses will clamp right up, and bolts into the stock location. Both tanks have baffling built in to aid in slush and bouncing sensor probes.Tanks where upgraded to polished.
Thanks Brian for the order, hope you like your tanks...
later
03-24-2008, 05:13 AM
#3
Here are some new tanks we just finished up. The fuel tank is for a standalone nitrous system, but we can also build these for water intercoolers, and water/meth tanks.
It will mount up using short self taper screws, the regulator does have to be bolted up after the tank is installed.
Customer wanted an over-flow tank to match. And had to have a low level sendor added. The large thread hole is where that will go. All the stock hoses will clamp right up, and bolts into the stock location. Both tanks have baffling built in to aid in slush and bouncing sensor probes.
Tanks where upgraded to polished.
Thanks Brian for the order, hope you like your tanks...
later
It will mount up using short self taper screws, the regulator does have to be bolted up after the tank is installed.
Customer wanted an over-flow tank to match.
And had to have a low level sendor added. The large thread hole is where that will go. All the stock hoses will clamp right up, and bolts into the stock location. Both tanks have baffling built in to aid in slush and bouncing sensor probes.Tanks where upgraded to polished.
Thanks Brian for the order, hope you like your tanks...
later
03-24-2008, 09:41 PM
#7
how much to duplicate both? I just drew up a fuel cell to mount in that same location the other day on solid works, i was bored at work and wanted to build one that would replace that brace in the back, the one i designed would keep strength there, and be ~1.5 gallon. interested in one of each of those if you are willing to build more. doesn't necessarily have to be polished for me.
Trending Topics
03-25-2008, 08:17 AM
#8
how much to duplicate both? I just drew up a fuel cell to mount in that same location the other day on solid works, i was bored at work and wanted to build one that would replace that brace in the back, the one i designed would keep strength there, and be ~1.5 gallon. interested in one of each of those if you are willing to build more. doesn't necessarily have to be polished for me.
400.00 for the over flow tank.
buy them both. 50.00 off.
1049.00 and that covers freight as well...
thanks
