A STS owners worst nightmare
#11
TECH Veteran
iTrader: (1)
Join Date: Apr 2004
Location: Arizona Bay
Posts: 4,038
Likes: 0
Received 0 Likes
on
0 Posts
I'm a little cautious to tow my car, but that's mainly due to my clutch. It's only about 4200lbs with the car and trailer, but I know SPEC didn't have towing in mind.
So when you guys say "low boost" what constitutes low?
So when you guys say "low boost" what constitutes low?
#13
I AM A MOTHERF*CKER
iTrader: (1)
Originally Posted by vanillagorilla
I'm a little cautious to tow my car, but that's mainly due to my clutch. It's only about 4200lbs with the car and trailer, but I know SPEC didn't have towing in mind.
So when you guys say "low boost" what constitutes low?
So when you guys say "low boost" what constitutes low?
14psi
#17
How do I change this text
Thread Starter
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by KySilverado
That picture gave me an idea. How about a second job for the truck? A fire pumper. Back it up into the lake, unhook the intake tube and attach a fire hose. Might come in handy.
J/K. lol, sounds like a good idea.
#18
TECH Resident
iTrader: (9)
Thats funny, I just added my second nosel to my meth kit and I had a syphoning problem because the resovor level was higher than the nosels. IT was running funny and I figured that was the problem, so I looked at my resovor and it was empty. I took my intake piping off from the throttle body and it was like a 1/2 a gallon of meth poored out. Drained it, started the motor and it ran fine. I thought I would hydro lock the motor, but it did not. I think I am really pushing it with this sts kit! I think I got lucky i did not go in to boost.
#19
How do I change this text
Thread Starter
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by TURBO8
Thats funny, I just added my second nosel to my meth kit and I had a syphoning problem because the resovor level was higher than the nosels. IT was running funny and I figured that was the problem, so I looked at my resovor and it was empty. I took my intake piping off from the throttle body and it was like a 1/2 a gallon of meth poored out. Drained it, started the motor and it ran fine. I thought I would hydro lock the motor, but it did not. I think I am really pushing it with this sts kit! I think I got lucky i did not go in to boost.
Then I got to drain all the piping. lol I also turned the engine over by hand before I tried to start it. It did start, but it didn't like it. lol
Thread
Thread Starter
Forum
Replies
Last Post