hemidup

I recieved a ZEX nitrous kit from a good friend of mine for Xmas. I'm thinking about using it in 3rd gear for intercooling in the 1/4.

trever1t

iTrader: (14)

hit it from the gate!
2-stage?

hemidup

Yup, 2 stage.

BlownChevy

iTrader: (20)

I assume you have some good pistons and rods in that bad boy

hemidup

I run coated Ross 8.6:1 pistons with Eagle rod's on a forged crankshaft. Callico coated Ferrea valves and the ARP main and head studs hold it together. I use 2 intank fuel pumps with 66 lb injectors and I'll be playing around with E85 before going with the NO2. I pulled the aftercooler that came with my original kit and only relied on the Snow Performance w/m kit for intercooling this past season. I figure with a small shot of NO2 will be like bringing your own "cold air in a bottle" to the track. Right now the NO2 is just on the drawing board, but I'm kinda liking the idea.

WJ MARK

iTrader: (7)

N2o

TrickTurbo

iTrader: (12)

Nitrous will help big time. Start really small say 35hp and try it. keep in mind the boost will start to go up a little with nitrous adding depending on the amount. 35 probably not much 100shot boost will go up.

hemidup

Thanks, Thats what I was thinking also. I'll probably start out with a 35 shot and play with it from there.

Superado

iTrader: (37)

where do you plan on putting the jet?
you do not have a FMIC, correct?

WJ MARK

iTrader: (7)

put the nozzle right before the TB