Trick Performance HI mount kit on a Z71???
09-27-2008, 07:19 PM
#1
TECH Fanatic
Thread Starter
iTrader: (15)
Join Date: Jan 2004
Location: Fort Lewis, WA
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
Trick Performance HI mount kit on a Z71???
Has this been done, and what interferencesw have there been. If there is anyone out there that has info, please let me know. Any and all info is GREATLY apreciated. By the way, this is a 1997 Z71.
Chris
Chris
Last edited by exodus; 09-28-2008 at 01:20 AM.
09-27-2008, 07:59 PM
#2
No interferences bolts right up.
here is a link for several customers that have installed the product.
Let me know if there is anything I can do for you.
Rick
here is a link for several customers that have installed the product.
Let me know if there is anything I can do for you.
Rick
09-27-2008, 08:53 PM
#3
No interferences bolts right up.
here is a link for several customers that have installed the product.
Let me know if there is anything I can do for you.
Rick
here is a link for several customers that have installed the product.
Let me know if there is anything I can do for you.
Rick
09-27-2008, 09:23 PM
#4
TECH Fanatic
Thread Starter
iTrader: (15)
Join Date: Jan 2004
Location: Fort Lewis, WA
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
yes, want to see if I can utalize the 99 and up kit since I will be doing a 6.0 swap. I know the bodies are different, but how much as far as routing is what I am wondering. If all it ends up to be is a little hood clearance, I can get around that. I like this kit due to the fact that it is high mounted, and this would keep the truck able to be off road, with less issues.
09-27-2008, 09:23 PM
#5
TECH Fanatic
Thread Starter
iTrader: (15)
Join Date: Jan 2004
Location: Fort Lewis, WA
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
I might have to reroute the downpipe some too, but thats nothing either.
Just trying to find out other opinions, and especially if there are anyone out there that have done this before.
Just trying to find out other opinions, and especially if there are anyone out there that have done this before.
And if one pops up a hammer, and torch has it covered. lol
Trending Topics
09-28-2008, 12:50 PM
#10
Unless you swap to a newer style engine in that truck, none of the parts from a newer truck will fit. The older engine has the exhaust ports spaced very differently and none of the hot parts will match up.
This is the 97 style Vortec V8
This is the 99+ Vortec style V8
This is the 97 style Vortec V8
This is the 99+ Vortec style V8