Turbo setup question
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Jacksonville, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Turbo setup question
Im looking to build a turbo kit for my silverado. its a mainly stock 4.8 (yea i know) and found a steal of a deal on a turbo. These are the specs on it:
.50 A/R Compressor
.63 A/R Turbine
3" Inlet & 2" Outlet
Compressor Wheel 3" Exducer , 2" Inducer
Turbine Wheel 2.2" Exducer , 2.58" Inducer
Would this be a decent setup for my daily driver? I dont know what kind of boost or power range would work best. The guy says it starts spooling about 3K rpm. Input would be greatly appreciated.
.50 A/R Compressor
.63 A/R Turbine
3" Inlet & 2" Outlet
Compressor Wheel 3" Exducer , 2" Inducer
Turbine Wheel 2.2" Exducer , 2.58" Inducer
Would this be a decent setup for my daily driver? I dont know what kind of boost or power range would work best. The guy says it starts spooling about 3K rpm. Input would be greatly appreciated.
#2
TECH Senior Member
iTrader: (26)
Im looking to build a turbo kit for my silverado. its a mainly stock 4.8 (yea i know) and found a steal of a deal on a turbo. These are the specs on it:
.50 A/R Compressor
.63 A/R Turbine
3" Inlet & 2" Outlet
Compressor Wheel 3" Exducer , 2" Inducer
Turbine Wheel 2.2" Exducer , 2.58" Inducer
Would this be a decent setup for my daily driver? I dont know what kind of boost or power range would work best. The guy says it starts spooling about 3K rpm. Input would be greatly appreciated.
.50 A/R Compressor
.63 A/R Turbine
3" Inlet & 2" Outlet
Compressor Wheel 3" Exducer , 2" Inducer
Turbine Wheel 2.2" Exducer , 2.58" Inducer
Would this be a decent setup for my daily driver? I dont know what kind of boost or power range would work best. The guy says it starts spooling about 3K rpm. Input would be greatly appreciated.
IMHO, way to small for even a 4.8 That's only about a 56mm turbo. Probable good for about 350hp.
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Jacksonville, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
The guy told me is was good up to 400 HP. I've got a stock motor wit a ported and polished throttle body now. I was gonna try and find a ls6 cam and yellow springs and put me a small Turbo. The turbo has 1500 miles on it and zero shaft play and I can get it for 60 bucks! I figured I could get it and use it with my stock set up and upgrade when i do the cam swap.
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Jacksonville, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Haha well its a heck of a.deal and even if I don't use it I think I could easily make my money back. I'm sure there's a ricer out there itching to try to boost his fart can tuner into the fast and the furious movie
Trending Topics
#8
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Jacksonville, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
i believe its a T3/T4 flange. the guy had it on his 240sx drift car so i kno its a small turbo. BUT im not lookin to make a dragster. Ive got and ext cab and if i could get around 300-350 to the wheels id be happy with that.....for now