Where are yall getting your 8 rib pulleys from?
For a blower that is the best looking set up I have seen, someone had their head screwed on right that day.
Congrads on your purchase.

 

Thats gonna be so Bad

 

Is this going on a stock 6.0L LS2? Can't remember if you changed engines or not...

 

Thank Ya!

 

Is 13 psi going to be on race gas?

 

So what's happening to the inside of the engine...rod bolts? Anything?

 

He has plans for a forged LS3 bottom end with Trick Flow heads in the works.

 

the 8 rib set up i will be getting from joe at left coast 32.

Here are my plans with it

9-10 psi see how she runs then just run race gas (truck is 3 years old 4400 miles). Im still debating on using meth.

Im looking to have LME do a 416ci ls3 set up and i have trick flow 225s.

Right now im going to see how 9-10 psi will be on race gas then go from there.

Maybe might run 13psi on race gas and 8 rib see how the stock bottom end does haha

 

you wont have any issues with that setup on the stock bottom end, my friend makes 825 to the tires with a 100k lq9. I would say ur gonna be just fine.

 

That same guy even made 785 to the tires with his LS2 in that GTO until the cam bolts backed out.

How long before you see the TVS2300? Should be one clean install with that new design and make big power. Excellent choice for your truck. There isn't much room under the hood anyway. The 2300 will likely be the hot ticket for TBSS's come next year.

BTW, unless 26" drag radials are stock on TBSS's, your wifes didn't run a 13.3 stock.