AFI Performance

Well we finally got some time to start working on this thing again. Here is a pic of the dual fuel cell for the Water/Meth, and the race gas for the nitrous system. The front cell is for the race fuel, and the second is for the meth.

It is a progress pic, but I will post up the finish shots fully polished and mounted soon.

sirk

thats looking sick martin. cant wait to go for a ride.

AFI Performance

Thanks man! You are for sure in on a ride in this thing!

The beers are starting to slow down the progress at this point so I think this pic of the final tacking will be the last for the night. I have one of my guys working on the thing straight all this week during working hours, so it should be all wrapped up over the next few days.

sirk

now you just have to drop it all into a old cyclone and run 8's.

hyespeeder

Is that safe won't the turbo heat up your fuel cells ?

AFI Performance

I am not too worried about it. There is quite a bit of space between the cold side of the turbo and the cells. I also might huck a little reflective heat tape on the thing if needed.

454SuperSport

dude, you are an animal. that is all

AFI Performance

Here you go man.

The truck still has to settle back down in the front another 1.5 inches at least because of the time spent with no weight on the front, but you will get the idea.

Sierra1320

iTrader: (1)

Your running a Dana 60 out back? What are the specs on the rear? Was it a direct fit from dyantrac or did you have to re-weld spring perches and such?

AFI Performance

It is a bolt in Dyna trac unit.