00Z71

iTrader: (2)

I am trying to figure out how to plumb my waste gate and blow off.
I will be using a manual boost controler for now.
The waste gate has 2 places were to connect the refrence lines and the blow off also has 2 . Could someone help me out on how to plumb these things. I know the trubo housing has one it.
Thanks

TG02Z71

iTrader: (2)

The best place for the wastegate reference signal is from your intake manifold, at least on the stocker that is. There is a nipple on the back of the intake manifold passenger side, you will have to cut the tab off, it is closed and not used from the factory.