what is needed to support 900rwhp (fuel system)
#1
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Aug 2008
Location: Where our street cars are faster than your racecars..Mississippi
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
what is needed to support 900rwhp (fuel system)
i will not be at 900 but more around the 650-750 range but i would rather be safe than sorry
i have bought
2- walbro 255 fuel pumps
and
1- set of 60# injectors
what are all of you running??
do i need to go with a different fuel pump (external)??
i have bought
2- walbro 255 fuel pumps
and
1- set of 60# injectors
what are all of you running??
do i need to go with a different fuel pump (external)??
#6
Blown 427 LSX
iTrader: (13)
Join Date: Oct 2006
Location: California
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
I did a very extensive fuel set up on my truck... went with a surge tank, -10 line, eliminator fuel pump, pro series regulator... I must have close to 4k+ in the fuel set up alone.
my only limiting factor are my fuel rails and injectors... as my bigger injectors and rails wont fit under the TVS 2300, other than that Im good to 1500hp on the fuel system.
Aeromotive makes some great stuff, check them out.
my only limiting factor are my fuel rails and injectors... as my bigger injectors and rails wont fit under the TVS 2300, other than that Im good to 1500hp on the fuel system.
Aeromotive makes some great stuff, check them out.
#7
12 Second Truck Club
iTrader: (1)
Join Date: Oct 2006
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
I went overboard on my fuel system setup also.. Figured buy it all once and not have to sell and buy bigger stuff later..
I plan to have 500rwhp soon as turbo is installed and hopefully 700ish once the motor is built next year..
20 gallon RCI fuel cell with sump and 2 8AN fittings and 2 8AN vents on top
Aeromotive A1000 fuel pump
Aeromotive bypass fuel regulator
Aeromotive 100 micron and 10 micron post /pre filters
Aeromotive Fuel speed controller
Hogan Manifolds custom built fuel rails /w 2 8AN fuel adapters
RC Engineering 750cc injectors (should be good for 750-800 hp supposedly)
and about 1,500 bucks worth of stainless steel braided hoses/fittings
I plan to have 500rwhp soon as turbo is installed and hopefully 700ish once the motor is built next year..
20 gallon RCI fuel cell with sump and 2 8AN fittings and 2 8AN vents on top
Aeromotive A1000 fuel pump
Aeromotive bypass fuel regulator
Aeromotive 100 micron and 10 micron post /pre filters
Aeromotive Fuel speed controller
Hogan Manifolds custom built fuel rails /w 2 8AN fuel adapters
RC Engineering 750cc injectors (should be good for 750-800 hp supposedly)
and about 1,500 bucks worth of stainless steel braided hoses/fittings