What will I need. Edelbrock Vic. Jr. EFI
02-28-2009, 11:58 AM
#1
Staging Lane
Thread Starter
Join Date: Jun 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
What will I need. Edelbrock Vic. Jr. EFI
So I am going to go with the Edelbrock Victor Jr. EFI intake on my truck. I have figured out what I will need to pipe from the supercharger to the intercooler and then the elbow to the intake, but what will I need to pick up as far as adapters or anything I will need for the fuel lines to go from my factory to the rails that come with the intake. Any sensors that get changed or any other random info that I might need to know. I also still need the intake so if there are any for sale for a good price let me know.
02-28-2009, 02:01 PM
#2
if you do a search on ls1tech, there are adapters to adapt stock fuel lines to -6 or -8 IIRC for aftermarket fuel rails.
something like this http://www.thunderracing.com/catalog...d=582&pcid=284
something like this http://www.thunderracing.com/catalog...d=582&pcid=284
Last edited by 4.8T; 02-28-2009 at 02:14 PM.
02-28-2009, 03:35 PM
#3
You will need to drill & tap that manifold for your vacuum connection...on my GTO, my original shop did 3 separate ports (3 drilled/tapped, nipples installed) but that was not necessary. I may cap 2 and run a single -6an to a vacuum manifold setup to clean things up.
Thread
Thread Starter
Forum
Replies
Last Post
