will this turbo make 500-550rwhp?
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Dec 2009
Location: Georgetown, South Carolina
Posts: 301
Received 0 Likes
on
0 Posts
will this turbo make 500-550rwhp?
I bought an ebay GT45 turbo with the intentions of putting it on a lq9, with can and springs. This will be my first turbo build, so I'm not looking for much. Anything in between 5-600rwhp will be great for now. This won't be going in a truck,but it will be for streets. I know it's on the small side compared to what I've been reading others have. Thanks in advance
Specs Compressor Size: Inlet = 4 3/16", Inducer = 68.7MM, Exducer = 97.8 MM, Trim = 69,A/R = 0.66, Intake (ID / OD) = 2.25" / 3.25"
Turbine: Outlet = 4", Turbo flange = T4, Downpipe flange = 3.5" V-band, Inducer = 87.4 MM, Exducer = 77 MM,Trim = 92, A/R = 1.05
Specs Compressor Size: Inlet = 4 3/16", Inducer = 68.7MM, Exducer = 97.8 MM, Trim = 69,A/R = 0.66, Intake (ID / OD) = 2.25" / 3.25"
Turbine: Outlet = 4", Turbo flange = T4, Downpipe flange = 3.5" V-band, Inducer = 87.4 MM, Exducer = 77 MM,Trim = 92, A/R = 1.05
#7
formery SilverSleeper1500 (12-06-2011)
iTrader: (1)
Join Date: Sep 2008
Location: Fort Lauderdale, FL
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
1.05 A/R Housing on the turbine is a little big for a 68 mm turbo but it definitely has the power potential off 500+ hp depending on other mods though
Last edited by Dbyers2; 12-29-2012 at 06:39 AM.
Trending Topics
#8
TECH Apprentice
Join Date: May 2012
Location: shelbyville tn
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
my 5.3 mustang put down 515hp on 10# mine was fully spooled by 3000 rpms, i just bought another on for the truck, also there is alot of guys on ls1tech making 700hp with one of theses