Winston Cup SVO block Winsdor 355ci
#1
On The Tree
Thread Starter
Join Date: Feb 2005
Location: Fayetteville, Georgia
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Winston Cup SVO block Winsdor 355ci 630-800hp monster
4 bolt main splayed caps/ Currently set up for dry sump oil pan / can be changed to wet sump.
Lentz rods / Full floating rods / J&E pistons / 10:1 compression / Spiral Locks / Steele SVO crankshaft standard / Dry sump oil pan / 2 reid solid roller camshafts(to get specs PM) Solid roller lifters only 3 hours use / Hardened chromoly push rods / Crane 1.6 roller rocker arms / roller springs cap. of .800 lift / titanium retainers & locks / Valves are titanium & stainless / Clevend style Winston cup heads aluminum(not yates but jack roush) 50 hours of machine work on heads / bronze guides / poly-locks / studded mains / studded head bolts / Double roller SVO timing chain set / Aluminum water pump / billet pulley / single plane hi rise jack roush intake / SVO dampener internally balanced engine / chrome moroso valve covers / needs Clevend style headers / file fit rings.
Motor is apart now but can be put back together
Motor made 630 hp with 9:1 pistons an 390 cfm carb, it is capable of 800 hp
Locust Grove Ga. Will deliver within 75 miles or if buyer wants freight. $4000.00 firm PM for contact info
Lentz rods / Full floating rods / J&E pistons / 10:1 compression / Spiral Locks / Steele SVO crankshaft standard / Dry sump oil pan / 2 reid solid roller camshafts(to get specs PM) Solid roller lifters only 3 hours use / Hardened chromoly push rods / Crane 1.6 roller rocker arms / roller springs cap. of .800 lift / titanium retainers & locks / Valves are titanium & stainless / Clevend style Winston cup heads aluminum(not yates but jack roush) 50 hours of machine work on heads / bronze guides / poly-locks / studded mains / studded head bolts / Double roller SVO timing chain set / Aluminum water pump / billet pulley / single plane hi rise jack roush intake / SVO dampener internally balanced engine / chrome moroso valve covers / needs Clevend style headers / file fit rings.
Motor is apart now but can be put back together
Motor made 630 hp with 9:1 pistons an 390 cfm carb, it is capable of 800 hp
Locust Grove Ga. Will deliver within 75 miles or if buyer wants freight. $4000.00 firm PM for contact info
Last edited by 85GMCstreetbeast; 11-05-2005 at 02:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
calsdad
8-Lug Truck Performance
34
06-14-2023 11:07 PM