silverado2000

IM looking for a dual pump set up for a boost build and ran across this. Lonnies performance has a dual pump kit that's drop in, hoobs switch, and harness for 625$. Has anyone ran this before?

Lonnies Performance Double pumper kits & Fuel Systems - GM Trucks

AndysC3

iTrader: (14)

I made my own for half that.

blue0453

iTrader: (3)

I just did a walbro 400 and converted to return style. I have less than $600 in pump, lines, fittings, and the regulator.

javzh

iTrader: (4)

what wiring harnesses did you use to wire them up? i dont see a dual pump harness on racetronix website.

which walbro/racetronix harness did you use for your setup.?
im either thinking a single 450 or dual 255s.

smokeshow

iTrader: (16)

You sure? I'd add up all those prices again

Mangled03gmc

iTrader: (95)

I am sure a kit could be put together for much less then that, but that is decent if you do not have the ability to make your own..

blue0453

iTrader: (3)

I just used the harness for our trucks and the walbro 400.

AndysC3

iTrader: (14)

The pumps were 128 each. The t fitting was 28 the hose was 30. 100' of 10ga wire was 30 Hobbs switch was 30. I already had the fpr which was 130. I made my own harness. Used the stock pump wire to trigger a relay which turns on one pump. The second pump is wired the same way but with the Hobbs switch wires in the ground for the relay. Turns on at 2 psi

smokeshow

iTrader: (16)

Andy, do I make bad jokes or do you just never get them..

oakley6575

iTrader: (5)

an 850+ hp truck is nothing to joke about.

kidding, kidding