03regcab sierra

iTrader: (7)

For mine i was thinkin of using a single a1000 pump with the fic 1000s. Not sure if im gonna run -8 or -10 fuel line to the rail yet and also use billet rails and aeromotive 1:1 regulator

SLO TRUCK

iTrader: (3)

Not Tested yet but system is ID 1000's, Aeromotive FPR, Aeromotive Eliminator pump, -10 feed Y'd to -8 at the front of the rails then Yd at the back of the rails to FPR and a single -8 back to the cell. . We will see where the id1000's get me but might need more injector. Hope not.

Pc2000trk

Running two 340lph pumps y'd into -8 feed returne -6 , aeromotives's boost reference regulator , billet 1/2" rails 103lb inj - 30amp relay for each pump

slowec

iTrader: (9)

You guys are turning this thread into a useful one. THANKS!!! I hope you will report back on some of this setups with results. It looks like if I wanna run a cammed 6.0 on the corn juice I will need an entire overhaul ti my current system.. durn-it .

AKlowriderZ71

iTrader: (22)