16s on the front of my 05
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Feb 2009
Location: Memphis, 10
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
16s on the front of my 05
Well im done with the "big wheels" and im gonna run the draglite lookalikes im running a 15 in the rear, and its time to order my fronts, the rim style i have is only available in 15's and 16's, well of the two, 16 is the obvious, but will they clear even with grinding the caliper? and if not, would a......lets say 01-02 rotor and caliper bolt on my truck so i could run a 16? thanks
#2
12 Second Truck Club
iTrader: (3)
Join Date: Feb 2006
Location: Baton Rouge
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
If you have the same rotors as my 08, then no they do not fit...
here's the test fit of a 16" rim
This is how much meat that would have to come off... You do it and let me know if it holds up, lol
here's the test fit of a 16" rim
This is how much meat that would have to come off... You do it and let me know if it holds up, lol
#3
12 Second Truck Club
iTrader: (3)
Join Date: Feb 2006
Location: Baton Rouge
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Anyone got an old set of calipers that'll fit my truck laying around after a big brake upgrade? Can be useable or not, doesn't matter to me. If so, let me know, I'll pop their cherry and see how much meat is left after I clearance them to fit.
#6
12 Second Truck Club
iTrader: (3)
Join Date: Feb 2006
Location: Baton Rouge
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Lance, that looks like about how much material would have to come off to fit my wheels. Makes me feel a little bit better about doing it. You guys might not be able to make fun of my tiny rear wheels anymore.... well maybe you will just make fun of all four now, haha.