4l60e issues
#1
Teching In
Thread Starter
Join Date: Dec 2007
Location: South Dakota
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
4l60e issues
did a little searching couldn't find exactly my issues....
drove my truck 30ish miles earlier today to my buddies trans worked fine. when i left the trans had 1st and second and they hold fine...but when it tries to shift into 3rd it will only grab above 2500rpm and i have no 4th. when i was about 1/4mile from home i tried to manual shift into 3rd and went in no problem and 4th as well no problem. i then slowed down to 10-15mph left it in D and it again would not shift into 3rd except for above 2500rpm and no 4th and i tried again to manual shift and didn't work...
ideas?
drove my truck 30ish miles earlier today to my buddies trans worked fine. when i left the trans had 1st and second and they hold fine...but when it tries to shift into 3rd it will only grab above 2500rpm and i have no 4th. when i was about 1/4mile from home i tried to manual shift into 3rd and went in no problem and 4th as well no problem. i then slowed down to 10-15mph left it in D and it again would not shift into 3rd except for above 2500rpm and no 4th and i tried again to manual shift and didn't work...
ideas?
#3
Teching In
Thread Starter
Join Date: Dec 2007
Location: South Dakota
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
DOH! was hoping it to be in the valve body. well im going to try my first trans rebuild myself. this is actually the second trans i toasted in the truck...lol
#6
Teching In
Thread Starter
Join Date: Dec 2007
Location: South Dakota
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
fluid smells a little burnt..not to bad. like i said no signs of anything wrong until last night so something let go causing 3rd to slip until 2500rpm. so it sits until i can find money to fix it.
Trending Topics
#8
Teching In
Thread Starter
Join Date: Dec 2007
Location: South Dakota
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
pulled transmission last night and when i cracked the tcase from trans i noticed i will need a new rear seal. Today i pulled the valve body apart everything looks good except for the 1-2 accum piston is starting to crack. I have the transgo hd2 shiftkit in it already so im hoping putting in the ALTO 3-4 clutch 9 pack will hold me until i can get a FLT
#9
Teching In
Thread Starter
Join Date: Dec 2007
Location: South Dakota
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
got it all apart looking at the 3-4 clutches..i dont know how thick they are supposed to be but they seem to look alright...but im not 100% sure what is good and bad as they only slipped on me for 10min or so before i put it in 2nd and drove home like that..so i sure hope new clutches fixes this and it is nothing else
so yeah edit cuz i r retard...helps if you pull the right clutch packs out lol..yes infact the 3-4 is gone
so yeah edit cuz i r retard...helps if you pull the right clutch packs out lol..yes infact the 3-4 is gone
Last edited by crashlz; 06-24-2010 at 10:11 PM. Reason: i r retard