4L80E is in... My impressions
#1
4L80E is in... My impressions
Picked up my truck from the trans shop on Friday and spent some time driving in this last weekend.
1st gear is a bit sluggish with the factory stall. The truck doesnt lose traction as easy anymore either. Going 60 mph in first gear is nice though. Shifts are awesome, nice and firm, but not harsh. Shifts nicely under part throttle.
The transition through the gears is great. There is little or no fall off in power when the truck shifts through all the gears. 2nd does 99 mph!
Freeway driving is much better, with power more readily available. The gearing in the transmission allows the trucks to pull hard at a variety of speeds.
My 4l65e pulled much better in first gear, but then fell on its face when shifting to second gear until about 60mph. Before the trans swap, I would shift into 3rd at 90 mph during the 1/4 mile. 3rd gear was dead with the 65e.
I could definately tell that the 80e has sucked up more power by the way the trucks takes off, but we will see. I plan on going to the track on March 8th, we will see how it does.
Im going to wait and see if I will get a stall or not. I dont want horrible traction problems.
1st gear is a bit sluggish with the factory stall. The truck doesnt lose traction as easy anymore either. Going 60 mph in first gear is nice though. Shifts are awesome, nice and firm, but not harsh. Shifts nicely under part throttle.
The transition through the gears is great. There is little or no fall off in power when the truck shifts through all the gears. 2nd does 99 mph!
Freeway driving is much better, with power more readily available. The gearing in the transmission allows the trucks to pull hard at a variety of speeds.
My 4l65e pulled much better in first gear, but then fell on its face when shifting to second gear until about 60mph. Before the trans swap, I would shift into 3rd at 90 mph during the 1/4 mile. 3rd gear was dead with the 65e.
I could definately tell that the 80e has sucked up more power by the way the trucks takes off, but we will see. I plan on going to the track on March 8th, we will see how it does.
Im going to wait and see if I will get a stall or not. I dont want horrible traction problems.
#3
TECH Fanatic
iTrader: (14)
Originally Posted by j's01silverado
Picked up my truck from the trans shop on Friday and spent some time driving in this last weekend.
1st gear is a bit sluggish with the factory stall. The truck doesnt lose traction as easy anymore either. Going 60 mph in first gear is nice though. Shifts are awesome, nice and firm, but not harsh. Shifts nicely under part throttle.
The transition through the gears is great. There is little or no fall off in power when the truck shifts through all the gears. 2nd does 99 mph!
Freeway driving is much better, with power more readily available. The gearing in the transmission allows the trucks to pull hard at a variety of speeds.
My 4l65e pulled much better in first gear, but then fell on its face when shifting to second gear until about 60mph. Before the trans swap, I would shift into 3rd at 90 mph during the 1/4 mile. 3rd gear was dead with the 65e.
I could definately tell that the 80e has sucked up more power by the way the trucks takes off, but we will see. I plan on going to the track on March 8th, we will see how it does.
Im going to wait and see if I will get a stall or not. I dont want horrible traction problems.
1st gear is a bit sluggish with the factory stall. The truck doesnt lose traction as easy anymore either. Going 60 mph in first gear is nice though. Shifts are awesome, nice and firm, but not harsh. Shifts nicely under part throttle.
The transition through the gears is great. There is little or no fall off in power when the truck shifts through all the gears. 2nd does 99 mph!
Freeway driving is much better, with power more readily available. The gearing in the transmission allows the trucks to pull hard at a variety of speeds.
My 4l65e pulled much better in first gear, but then fell on its face when shifting to second gear until about 60mph. Before the trans swap, I would shift into 3rd at 90 mph during the 1/4 mile. 3rd gear was dead with the 65e.
I could definately tell that the 80e has sucked up more power by the way the trucks takes off, but we will see. I plan on going to the track on March 8th, we will see how it does.
Im going to wait and see if I will get a stall or not. I dont want horrible traction problems.
#7
9 Second Club
iTrader: (37)
Join Date: Nov 2001
Location: Cleveland, OH
Posts: 7,911
Likes: 0
Received 0 Likes
on
0 Posts
stock converter is only 65#...vs 35# for a 9.5 The converter in the classifieds is a good converter/deal if you dont tow. Quicksilverado is using the same one and his truck cut a 1.65 60' with it last year
Trending Topics
#8
TECH Addict
iTrader: (2)
Join Date: Feb 2004
Location: Tampa, Fl
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
What did the install cost you? Did the shop have any problems with the install? Had they done an '80 swap previously? Is the converter install on an '80 as difficult as on a '60? Im already nearing 7K and I havent gotten everything I need for my motor and trans swap, so I may need to put off the converter. Im not putting crap on credit cards.
#9
TECH Junkie
iTrader: (8)
Originally Posted by greentahoe
What did the install cost you? Did the shop have any problems with the install? Had they done an '80 swap previously? Is the converter install on an '80 as difficult as on a '60? Im already nearing 7K and I havent gotten everything I need for my motor and trans swap, so I may need to put off the converter. Im not putting crap on credit cards.
#10
TECH Addict
iTrader: (2)
Join Date: Feb 2004
Location: Tampa, Fl
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by quicksilverado
Troy, to bad you live so far away. If you were closer I could help and save you a bundle. The stall on the 80e is alot easier to swap. There is no bell housing on the bottom half of the tranny. This makes access to the converter much easier. You will hate life with the stock stall. When you finally get another one in it will make a huge difference.