60e to 80e ?
#1
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Nov 2011
Location: Douglasville, Ga
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
60e to 80e ?
I just bought an 80e with the tranfercase still attached. Can I use the tcase that came on the 80 or do i need to use the 60 and get the shaft and adaptor?
also what flywheel will i need? the stock 80 or is there a certain one with an adaptor made for the 60,80 swap?
will the speartech harnes be a plug n play?
if there is any tip I have not read in the stikies please fill me in.
This is for a 2004 silverado 5.3.
also what flywheel will i need? the stock 80 or is there a certain one with an adaptor made for the 60,80 swap?
will the speartech harnes be a plug n play?
if there is any tip I have not read in the stikies please fill me in.
This is for a 2004 silverado 5.3.
#3
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Nov 2011
Location: Douglasville, Ga
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
yeah, my tuner (turbodave) says that the segment swap is not a problem. I'm just trying to get all my ducks lined up before I take the 60 out. so maybe not to many hang ups or mising things I need. I got a smoking deal on the 80 ($325) with tranfercase, trans,dip stick and tube, converter out of a low mileage truck. After 5 60's in the last yr I'm going to try this.