6lug Racestar wheels possibly coming out! (details inside)
#11
#17
Wheel prices are based off sizes. The 17" wheels cost a little more because more material is used. Email 1320wheels@gmail.com for a quote.
#18
TECH Veteran
iTrader: (5)
I am excited about the 6-spoke race star design. I am a fan of clean 6-spoke designs anyway. That is one heck of a deal for the initial run too. I will likely be emailing Derek expressing my interest.
I am concerned about the 6.5 backspace on the 15x10 though as that will not tuck a big tire on the lowered trucks.
Last edited by BigKID; 10-30-2013 at 09:15 AM.
#19
TECH Junkie
iTrader: (9)
the issue is the center section area. Without the lugs being centered in the spoke, the center section has to be much larger to distribute the load of the lug. Translate that to a 5.5" bolt circle and you have a much larger center section which dramatically shortens the spoke length especially on a 15" wheel. That is why a 6x5.5 bolt pattern can not be simply drilled into a lot of the current 5-spoke designs.
I am excited about the 6-spoke race star design. I am a fan of clean 6-spoke designs anyway. That is one heck of a deal for the initial run too. I will likely be emailing derek expressing my interest.
I am concerned about the 6.5 backspace on the 15x10 though as that will not tuck a big tire on the lowered trucks.
I am excited about the 6-spoke race star design. I am a fan of clean 6-spoke designs anyway. That is one heck of a deal for the initial run too. I will likely be emailing derek expressing my interest.
I am concerned about the 6.5 backspace on the 15x10 though as that will not tuck a big tire on the lowered trucks.