SSlow 4.8

iTrader: (4)

Looks like I'll be going with a 15 in. wheel. Looking to get some MT DR's, upgrading from the ET Streets i have now. They have a wider selection of tires for those running the 15 in. wheel. Did GM put a factory 6 lug 15" wheel on anything? Where should i get some from, been searching on ebay, found a bunch of crap...

also if anyone is running some MT DR's... what size do you recommened. Its a 01 rcsb with 4.10 gears.

slowprocess

iTrader: (9)

Got mine from Summit. 15x10s Paid alittle over $100 for them both. They're nothing special to look at, but they serve their purpose well at the track. I'm running 28x11.5x15 Hoosier Quicktime Pros on them. You can get a 15x8 from Summit pretty cheap as well. These wheels were made for a big brake kit, so you don't have to shave that much off of the calipers.

SSlow 4.8

iTrader: (4)

alright sweet thanks... i didnt even search there, figured they would be too expensive.

Quik

iTrader: (7)

yes 80s 3/4 ton truck had them....igot my ralley wheels from a truck of that era

SSlow 4.8

iTrader: (4)

oh alright...

hey slow, the 15x8's on summit... or the 15x10's you bought... do you have a link? cant seem to find to much info on the ones from summit.

SSlow 4.8

iTrader: (4)

what about these >>> http://store.summitracing.com/partde...5&autoview=sku

15x10 with a 6x5.50 lug pattern 4.500in backspacing. Is that backspacing and lug pattern sound right to you all?

slowprocess

iTrader: (9)

Check these out

http://store.summitracing.com/partde...5&autoview=sku

slowprocess

iTrader: (9)

These are the ones I have.....backspacing is, how can I put this, pretty damn terrible. I just don't go to any shows or cruises with them on.
http://store.summitracing.com/partde...5&autoview=sku

SSlow 4.8

iTrader: (4)

ya i was looking at those... what do you mean its terrible... is 4 in. too little? or does it not look right?

the ones i posted... do you see anything wrong with them?

dirt track racer 81

iTrader: (45)

these are the ones i got..they are by no means fancy but they do the job 15x10's they stick out a bit

http://store.summitracing.com/partde...5&autoview=sku