99LsSilverado

iTrader: (3)

I have a question about swapping out axles and different gear ratios between front and rears. Im looking at trying out 4.10s by getting a free axle from a friend but dont want to go through changing both front and rear axles out and not liking them. If I were to take the front driveshaft out would I be alright to run it that way to see if like them. If I do like them I could change out the front gears later to match.

I hope that this makes sense to everyone and thanks in advance for any answers

bullygoat

As long as you're not AWD you'll be fine.

dlt76028

iTrader: (13)

you don't have to take the driveshaft out, just don't push the 4wd button.

SloStepSide

iTrader: (8)

x2 bad things happed you push the 4wd button with diff gears

99LsSilverado

iTrader: (3)

Thats why if I do that I would take the shaft out just incase someone else tries to drive it and puts it in 4wd.

dlt76028

iTrader: (13)

pull the fuse, or disconnect the 4wd buttons.