nikon1999

iTrader: (15)

Driving along today on the highway i gave it a little gas to pass somebody and the truck kind of hickuped for a second and a check engine light came on? Pulled the codes to get a maf code po101 and a po757 for solenoid B. It drove ok at highway speed but as soon as i stopped trying to take off it felt like it had a 4000 stall. Cleared the codes and its been fine since? Any thoughts...tranny on its way out or just forget about it

2004SSS

iTrader: (25)

you could have maxed out the maf, and the solenoid b is known to throw with higher stall converter's there are ways to fix it with tuning .

nikon1999

iTrader: (15)

i appreciate the input, i wasn't making any boost at the rpm to max out the maf, and i have a stock stall