budhayes3

iTrader: (19)

Who didn't change gears...Were most of you able to re-use your factory shims and obtain the correct backlash? Did you have to mess with the pinion depth at all?

I've also heard that getting the correct carrier bearings is tough for the 99's, anybody have any info on that?

dirt track racer 81

iTrader: (45)

ive always reused the stock pinion shim and never had any problems, thats with motive gears.

bluecajun5.3

iTrader: (31)

on the pinion shim (same here motive gears)
the carrier shims they might fall in place or some in/some out.

StrokerAce03

iTrader: (7)

x3 on the shims

I didn't change gears when I did the install and just reinstalled the shims the same as they came out and it lined up perfect. Just remember which shims go where and it should be ok.

bud8fan

iTrader: (9)

x4 on the shims
did not change the stock gears either but always check your backlash...

krambo

iTrader: (4)

Take some pics of your install! I am going to be doing it as well and would love to see what I am going to be getting myself into...

454navyss

iTrader: (46)

we left all of the stock shims in mine, went from 3.42 open diff to stock GM 3.73s and tru-trac, no noise at all

BigCountryx

iTrader: (3)

got me considering doing this now, i'm staying with the factory 3.73s just want to dump the g80 before i regret it... i did a 4.56 / Detroit swap in my old Z71 and vowed to never do it again, what a pita, But if it's as simple as swapping carriers and keeping everything else the same, i just may jump into it.

budhayes3

iTrader: (19)

You'll probably be doing yours before mine...I'm a long way away, just gathering information so I have my ducks in a row when the time comes

built408

iTrader: (10)

I have installed 4 true-tracs and I had to adjust the shims on all of them. But I am a picky SOB. Not saying it won't work, just might be alittle noisy.