frame notching...

Reply Subscribe

Thread Tools

Search this Thread

03-15-2008 | 10:28 PM

#11

BlackGMC

Resident Retard

iTrader: (31)

Joined: Jan 2006

Posts: 17,216

Likes: 20

From: Fort Worth - TX

Quote:

Originally Posted by silver-mod-o

I'm going to build it with my 110 but I have an old lincold stick welder that I'll be putting it in the frame with, plus probably 6 1/2" grade 8 bolts on each notch... even cranked all the way up I dont trust the penetration of the 110 either. I'm not a "welder" but I can stick **** together where it doesnt come apart LOL...

Depending on the size plate your going to build it out of, if your going to use your 110, buy the biggest wire (.030 or .035) flux core, do not use gas.... You can welding thicker material with flux core rather than with gas... Once again just my opinion...

Reply Like

03-16-2008 | 12:53 AM

#12

blue2003ls

TECH Regular

iTrader: (11)

Joined: Oct 2007

Posts: 496

Likes: 0

From: Roseville, CA

Here is the McGaughy's notch. I had the Belltech on my last truck and liked the kit alot better than the McGaughy's but it is also about twice the cost.