Front coil over installed
#1
Front coil over installed
Thanks Jon ( DBRODS & MINI"S )
i had a severe issue of unloading the rearend, come to find out after talking to some suspension chassics guys i needed to get the truck of equal level, well to accomplish that i purchased a set of coil overs Jon and i discussed. well it gave me the level i needed on all 4 corners! just from a snap of the throttle i can feel the front wanting to rise, not easy on street tires , this should work well on launch now ( hopefully ) ever since the new power plant i yet to get a clean pass at a mere 10.4 with a 150 shot of nitrous at 131. hopefully with these coil overs i can actually plant the power.
Also decided to do a gear swap back to 4:10s since we are looking at a big dose of nitrous here soon!
i had a severe issue of unloading the rearend, come to find out after talking to some suspension chassics guys i needed to get the truck of equal level, well to accomplish that i purchased a set of coil overs Jon and i discussed. well it gave me the level i needed on all 4 corners! just from a snap of the throttle i can feel the front wanting to rise, not easy on street tires , this should work well on launch now ( hopefully ) ever since the new power plant i yet to get a clean pass at a mere 10.4 with a 150 shot of nitrous at 131. hopefully with these coil overs i can actually plant the power.
Also decided to do a gear swap back to 4:10s since we are looking at a big dose of nitrous here soon!
#5
next thing is ill be doing a anti-roll bar ! help from body roll! been talking to a few chassic guys, they wanna do the work but i dont have the pockets right now to supply the funds lol!!
ive got about 1800 miles on the 408 with quite a few nitrous runs! shes getting better each time out. just hoping this solves alot of my issues with slipping off launch!
Last edited by skeet; 07-01-2012 at 09:56 PM.
#6
TECH Fanatic
iTrader: (23)
Join Date: May 2006
Location: Ravenna, MI
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
actually alot better, specially since i can adjust them and also the back, makes for a nice ride down the highway and around time!! easy install also!!
net thing is ill be doing a anti-roll bar ! help from body roll! been talking to a few chassic guys, they wanna do the work but i dont have the pockets right now to supply the funds lol!!
ive got about 1800 miles on the 408 with quite a few nitrous runs! shes getting better each time out. just hoping this solves alot of my issues with sipping off launch!
net thing is ill be doing a anti-roll bar ! help from body roll! been talking to a few chassic guys, they wanna do the work but i dont have the pockets right now to supply the funds lol!!
ive got about 1800 miles on the 408 with quite a few nitrous runs! shes getting better each time out. just hoping this solves alot of my issues with sipping off launch!
Do you have a front swaybar right now? I thought about a torsion style ARB in the rear of mine but I'll probably just do a cheap swaybar.
Hopefully this 408 stays together a while. No comp springs this time though so it should live. lol
Trending Topics
#8
Awesome. You have those ridetech coilovers in back too or something else?
Do you have a front swaybar right now? I thought about a torsion style ARB in the rear of mine but I'll probably just do a cheap swaybar.
Hopefully this 408 stays together a while. No comp springs this time though so it should live. lol
Do you have a front swaybar right now? I thought about a torsion style ARB in the rear of mine but I'll probably just do a cheap swaybar.
Hopefully this 408 stays together a while. No comp springs this time though so it should live. lol
Last edited by skeet; 07-02-2012 at 06:10 PM.
#10
Did you add any kind of reinforcement to the shock mounts? I've seen doing this swap discussed more than a few times but the question has always been brought up about the strength of the shock mounts holding the entire vehicle weight.