I Put a Cam but no torque converter
#1
Teching In
Thread Starter
Join Date: Apr 2009
Location: Texas
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
I Put a Cam but no torque converter
i droped a cam in my motor but no stall so the tuner left the torque management when he tuned my truck. he said he will remove it when i install a torque converter. theirs people out their that i konw that have a cam but no stall and their truck's are running with no hesitation. but they also have been having tranny problems should i take off the torque management and risk my tranny or wait for the stall.
#4
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
The torque management being removed after the bigger verter is installed will actually be harder on the tranny vs the stock one.. Taking out the tq management is harder on the trans with or with out a diff verter. I would only take 75% of the trans management out and have all of it removed from the engine.. The only thing the stall is going to help is performance and the cam if it is a big duration cam or has a tight lsa
#6
x2. Your tuner needs to learn his stuff. You can remove 100% TM with a supercharger/turbo and a stock transmission and it will be just fine if you know how to drive properly and respect it.
Trending Topics
#8
formerly Stroked-DSM (11/24/2010)
iTrader: (3)
Join Date: May 2009
Location: Florida
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
sorry for being a noob, as I'm just getting into these trucks and know only a little bit, but what exactly is the TQ management? I may just know it as something else
#9
Where's the Beef?
iTrader: (8)
I'd go ahead and remove 70-80% and start saving for an FLT transmission. Try to get one before you blow your stocker. JUST IN CASE you ever have more problems later down the road.
#10
Former Vendor
iTrader: (21)
Torque management will also reduce engine power during shifts, so the transmission does not see as much power while changing gears. A high stall converter has pros and cons when it comes to the life of the transmission. It will absorb more RPM change while changing gears, thus making shifts softer and easier on the trans. But it will also generate more heat, the number 1 trans killer. So always put a nice cooler on to prevent overheating. The other factor is increased torque multiplication, so the trans will see an increase in torque on launches. So it is a little bit of a gamble on a stock trans, but the biggest help is a cooler.
Chris
Chris