GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

Just finished 4l80 swap

Thread Tools
 
Search this Thread
 
Old 05-31-2013 | 02:25 PM
  #11  
03sierraslt's Avatar
Admin
iTrader: (22)
 
Joined: Jul 2004
Posts: 19,004
Likes: 217
From: Western PA
Default

A shift kit will firm it up nice. Just make sure your shift pressures are not too high in the tune because once you add the shift kit they will need adjusted down depending on where they are now.
Old 05-31-2013 | 03:42 PM
  #12  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Yea just working with the tune makes the 80E shift nice even without the shift kit.
Old 05-31-2013 | 03:55 PM
  #13  
nickleahy23's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 594
Likes: 0
From: Portage,WI
Default

Originally Posted by nonnieselman
Yea just working with the tune makes the 80E shift nice even without the shift kit.
had a question about this. Is it worth throwing a shift kit in the 4l80e or can a tune get it good enough? I know its a little different than the 60e and that there is no servo swap..what are the basic upgrades that you would recommend?
Old 05-31-2013 | 03:57 PM
  #14  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Depends on how much power you plan on putting to it..
Tyler is running mid 10s in a 2wd Extended cab with a stock 80E.
Old 05-31-2013 | 04:19 PM
  #15  
zz454Chevelle67's Avatar
Thread Starter
Launching!
 
Joined: Apr 2013
Posts: 265
Likes: 65
From: Buda, Tx
Default

Did not realize tuning could improve shift, good to know.
Old 06-02-2013 | 08:34 PM
  #16  
nickleahy23's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 594
Likes: 0
From: Portage,WI
Default

Originally Posted by nonnieselman
Depends on how much power you plan on putting to it..
Tyler is running mid 10s in a 2wd Extended cab with a stock 80E.
heads/cam/fbo lq4 is all..in a 4x4 reg cab short box..some type of converter idk what speed yet..you think just a tune would get the job done? I suppose I could always add a shift kit if i was unhappy with it
Old 06-03-2013 | 09:14 AM
  #17  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

oh yea that would be plenty. HD2 wont hurt but it will be fine without it if the tune is setup good.
Old 06-03-2013 | 01:08 PM
  #18  
nickleahy23's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 594
Likes: 0
From: Portage,WI
Default

Good deal. Now another question. The thing I love about my built trans in the tahoe is that it will hold first gear for as long as I want. Can i do that with just the tune for the 4l80e or will i need the shift kit, like my tahoe, to achieve that?
Old 06-03-2013 | 01:13 PM
  #19  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Talking about manually holding first? i have my towhaul setup to do that.
Old 06-03-2013 | 01:18 PM
  #20  
nickleahy23's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 594
Likes: 0
From: Portage,WI
Default

ya, my buddies trucks that are just tuned, and when I just had a tune before the trans it would kick out of first..maybe i just didnt mention it during the tune or didnt pay attention if it did it in tow/haul or not..mine does it no matter what now


Quick Reply: Just finished 4l80 swap



All times are GMT -5. The time now is 03:32 PM.